Villa with pool in Lajares

This villa is located in the "Beverly Hills" of the northern part of the island, Lajares.

In just a few minutes by car, you can reach the lagoons to the right of El Cotillo at the lighthouse and the large, secluded beaches to the left.

Lajares is THE melting pot on the island, with over 100 nationalities registered as residents, resulting in a highly international lifestyle in this area.

Supermarkets, dentists, pharmacies, veterinarians, bars, restaurants, and more are all available in the town.

Corralejo is approximately a 10-minute drive away, and the airport is about 35 minutes away.

There are also plenty of recreational and sports activities available in the vicinity.

Plot 1,000m2

Option 1:

Extension by an additional 1,000m2 of rustic land as additional garden area

​

Living area ground floor 132m2

*Living/dining room with open kitchen

*3 bedrooms

*2 bathrooms

*Dressing room

*Utility room

Option 2:

Garden annex module 45m2

*2 bedrooms

*2 bathrooms

Option 3:

Roof extension 30m2

*1 bedroom

*1 bathroom

Option 4:

Carport/wooden hut with at least 40m2

Option 5:

Photovoltaic system

Option 6:

Air conditioning with heating function

Option 7:

10,000 l masonry water tank

​

Built-up outdoor area 76m2

*Covered entrance area

*2x patio

*Veranda

*BBQ area with pergola

*Sun corner

25m2 pool

CONSTRUCTION STRUCTURE:

• Foundation made of waterproof reinforced concrete.

• Support pillars made of reinforced concrete.

• Floor slabs made of concrete beams and concrete bricks.

• Occasionally reinforced concrete slabs.

• Pine wood beams in white-painted pergolas.

MASONRY:

• Facades made of lightweight concrete blocks + plasterboard cladding: Block 15 with double chamber + 4 cm XPS insulation + self-supporting 15 mm plasterboard cladding with 4 cm mineral wool insulation.

• Ceiling cladding with waterproof plasterboard (in bathrooms).

• Facade cladding with white waterproof plaster and white elastic paint.

CARPENTRY:

• Exterior carpentry in matte black anodized aluminum or similar material with thermal break. Insulating glass, if necessary Stadip glass, Cortizo carpentry of type COR60 (tilt and turn) - COR 4700 (sliding doors). Large sliding doors in the living room with built-in floor guides.

• High-quality entrance door with security lock and stainless steel handle.

• Interior carpentry made of moisture-resistant white matt lacquered MDF. Handles and knobs in matte stainless steel.

• Built-in wardrobe front made of white lacquered MDF with sliding doors, interior fittings of the wardrobe, and drawers.

• Fixed and sliding louvers made of pine wood or equivalent material.

FLOORING:

• Interior floor made of large-format porcelain stoneware.

• Non-slip microcement floor on outdoor terraces.

• Optional light oak laminate flooring in the bedrooms.

COVERINGS AND TILES:

• Vertical surfaces with washable anti-mold emulsion paint.

• Waterproof microcement in bathrooms.

• Facade cladding in white color with details in gray microcement or equivalent material.

ROOF:

• Inverted roof with 4 cm XPS insulation, covered with gravel.

• Waterproof membrane made of EPDM.

SANITARY FACILITIES:

• Sanitary facilities in white ceramic, Meridian type by Roca or equivalent.

• Wall-hung toilets with built-in dual-flush cisterns.

• Chrome-plated fittings by Grohe or equivalent.

• On-site showers with microcement surfaces and large stainless steel drains.

INSTALLATIONS:

• Distribution pipes made of polypropylene.

• Hot water production system with air-water heat pump.

• Single-house sewage treatment plant with irrigation and a 2,300 l water tank.

PROPERTY:

• Dry stone walls up to 1.20 m high along part of the property.

• Pool with a compact cleaning system. Lined with fiberglass and white rubber paint.

• Shower in the pool area.

• Entrance gate for vehicles made of Corten steel, 4 m long, and a pedestrian gate, 1 m wide.

• The property is finished with compacted volcanic stone.